扭剪扳手是一種常用的手動工具，用于緊固和松開螺栓和螺母。以下是扭剪扳手常見的故障及維修方法：

　　A torque wrench is a commonly used manual tool for tightening and loosening bolts and nuts. The following are common faults and maintenance methods of torque shear wrenches:

　　1. 扭剪扳手無法扭轉：可能是扳手內部的齒輪損壞或者潤滑不足。方法是拆開扳手，清潔和潤滑齒輪，或者更換損壞的齒輪。

　　1. The torque wrench cannot be twisted: it may be due to damaged gears or insufficient lubrication inside the wrench. The solution is to disassemble the wrench, clean and lubricate the gear, or replace the damaged gear.

　　2. 扭剪扳手扭力不準確：可能是扳手內部的彈簧松弛或者損壞。方法是拆開扳手，檢查彈簧的狀態，如果松弛或者損壞，需要更換彈簧。

　　2. Incorrect torque of the torque wrench: It may be due to loose or damaged springs inside the wrench. The solution is to disassemble the wrench and check the condition of the spring. If it is loose or damaged, the spring needs to be replaced.

　　3. 扭剪扳手扭力過大或過?。嚎赡苁前馐謨?nèi)部的調節裝置失效或者損壞。方法是拆開扳手，檢查調節裝置的狀態，如果失效或者損壞，需要更換調節裝置。

　　3. Excessive or insufficient torque of the torque wrench: It may be due to the failure or damage of the internal adjustment device of the wrench. The solution is to dismantle the wrench and check the status of the adjustment device. If it fails or is damaged, the adjustment device needs to be replaced.

　　4. 扭剪扳手手柄松動：可能是手柄內部的螺紋松動或者損壞。方法是拆開手柄，檢查螺紋的狀態，如果松動或者損壞，需要更換螺紋。

　　4. Loose handle of torque shear wrench: It may be due to loose or damaged threads inside the handle. The solution is to disassemble the handle and check the condition of the threads. If they are loose or damaged, the threads need to be replaced.

　　5. 扭剪扳手外觀損壞：可能是扳手外殼受到撞擊或者磨損。方法是更換外殼或者進行修補。

　　5. Damage to the appearance of the twist and shear wrench: It may be due to impact or wear on the wrench housing. The solution is to replace the casing or repair it.

　　維修扭剪扳手需要一定的知識和技能，建議在維修人員的指導下進行。

　　Repairing torque wrenches requires certain professional knowledge and skills, and it is recommended to do so under the guidance of professional maintenance personnel.

本文由扭剪螺栓專用扳手友情奉獻.更多有關的知識請點擊:http://brianstaruk.com/真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the special wrench for twisted shear bolts. For more related knowledge, please click: http://brianstaruk.com/ Sincere attitude. We provide you with excellent service. We will gradually contribute more knowledge to you. Please stay tuned