1.打開鎖止環 扭力扳手的手柄上方有一個鎖止環,需要將鎖止環下拉才可調節扭力。
1. There is a locking ring above the handle of the open locking ring torque wrench. The torque can be adjusted only after the locking ring is pulled down.
2.調節扭力 保持鎖止環下拉狀態,左右轉動手柄調節扭力,向右轉為扭力變大,向左轉為扭力減小。
2. Adjust the torque to keep the locking ring pulled down, turn the handle left and right to adjust the torque, turn it right to increase the torque, and turn it left to decrease the torque.
3.讀取刻度 持續轉動手柄,轉動目標扭力時停止。桿上的數字為主刻度,手柄上方轉動位置的刻度為副刻度,讀數為主刻度與副刻度相加。
3. Read the scale and continue to turn the handle until it reaches the target torque. The number on the rod is the main scale, the scale at the rotating position above the handle is the secondary scale, and the reading is the sum of the main scale and the secondary scale.
4.關閉鎖止環 扭力調整完成后,將鎖止環向上推鎖定刻度調節功能,左右旋轉手柄確保鎖止到位,即可使用。
4. After closing the locking ring torque adjustment, push the locking ring upward to lock the scale adjustment function, and rotate the handle left and right to ensure that the lock is in place.
The above is a detailed introduction to the price of the wrench, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://brianstaruk.com
